One of the requirements of landscape architects is to add their professional information to documents. Experts working in Idaho will need to ensure their name, state, and license number are included on drawings, plans, and specifications for projects to remain in good standing with the board. Rubber stamps and embossing seals are the most common methods of doing this.
However, not all states allow landscape architects to use both seals and stamps. In some cases, one will be required. Even when both are allowed, there are additional requirements based on the state. That’s why it’s important to choose Idaho landscape architect seals that meet all the requirements so you can use them on the job.
This guide will give you all the requirements set out by Idaho for landscape architect seals. We’ll ensure you know what size they need to be, what information should be included, and where certain words should be listed. Once you have all the information on regulations, we’ll also share a series of products that will meet your needs.
Idaho Landscape Architect Seal Requirements
Before we get into the specifics of Idaho landscape architect seal requirements, we want to share some basics. These are four important things to know when choosing seals for your official duties.
- The state of Idaho requires the use of rubber stamps and does not allow embossing seals on official documents.
- Each stamp used in the state must be 1 ¾ inches in diameter.
- All stamps need to have the prefix “LA-“ before including the license number.
- The word “Licensed” must be included on the stamp.
Since rubber stamps are required, embossing seals aren’t appropriate for Idaho landscape architects. The stamps need to be 1 ¾ inches in diameter and each stamp should include the word “Licensed.” The state board requires the seal to include the name of the landscape architect, their license number, and the name of the state issuing the license. Therefore, it should state “Licensed Landscape Architect.”
The general seal used in Idaho has a dotted black border along the outside. Inside this border, the top reads “State of Idaho,” while the bottom states “Licensed Landscape Architect.” A solid border sits outside the text and the center has the architect’s name and license number.
Contacting the Idaho State Board
There may be a point where you need to reach out to the Idaho state board. This is the best way to get updated information about seal requirements. This institution can also provide information about licensing and registration. The board will also provide answers to questions otherwise related to Idaho landscape architecture.
If you wish to contact the proper group for information by mail, you can use the below address:
Idaho Bureau of Occupational Licenses
PO Box 83720
Boise, ID 83702
In addition, the email address IBOL@IBOL.Idaho.gov can be used to contact the board more quickly than traditional mail.
Selecting the Best Seals and Stamps for Idaho Landscape Architects
Since Idaho has strict requirements for landscape architect stamps, it’s essential to ensure that all the required information is included in the document impressions you make. This means choosing a company that makes stamps that take regulations into account. Doing otherwise could lead you to order stamps that do not meet requirements, making them unusable in the state for official business.
We offer a huge number of stamps that are designed to meet Idaho requirements. Each of them can be used on various documents seen on the average day of a landscape architect. In addition to offering stamps, we also provide inks and other items that may be used on the job.
Every stamp we offer is guaranteed to meet the Idaho state approval guidelines. When ordering stamps, you will also be provided a set of electronic seals in various formats. All seals are shipped out quickly and made of top materials to ensure long-lasting use.
Slim Pre-Inked Stamp
This Slim Pre-Inked Stamp is made for architects who spend time outside of the office. It has a sleeker look and a more convenient operation for outdoor use than a desk stamp. This Idaho Landscape Architect seal stamp has a compact design so you can easily take it with you anywhere you go. It’s made to be small and squat so you can add it to a pocket, purse, or briefcase and use it as needed.
This stamp meets all Idaho landscape architect requirements. It can create up to 10,000 impressions before needing to be re-inked. You will have the chance to choose from seven colors of ink.
Self-Inking Stamps
If convenience is the most important factor to you at work, consider the Idado Landscape Architect Seal Self-Inking Stamp. It is designed to make fast impressions on paperwork of all types. The Idaho Landscape Architect seal stamp has a quick press and stamp application. You simply take out the stamp, pull off the cap, and press it to a document to add your name, state, and license number. The ease of use means you can run through the paperwork quickly to get to other tasks.
There are 11 colors of these self-inking stamps available. It comes inked to make about 5,000 impressions before a refill is needed. We also sell extra ink so you can stock up with an extra bottle of ink and ensure you have extra on hand when needed.
Regular Hand Rubber Stamp
For the more traditional landscape architect in Idaho, another solution for document impressions is the Idaho Landscape Architect Regular Hand Rubber Stamp. It’s a blast from the past with a wooden handle and a rubber stamp base, but it has modern appeal through its excellent construction. This Idado Landscape Architect seal is economical and works best in the office. Make sure you purchase an ink pad to go with it. You can find them in a variety of colors.
This Idado Landscape Architect seal stamp is built with a precision laser-engraved die to ensure the impressions look great on every document. It’s also particularly useful for making impressions on Mylar. In addition, this old-school stamp is made in America.
MaxLight Pre-Inked Stamps
The final product specifically designed to meet Idaho landscape architect seal stamp requirements is the MaxLight Pre-Inked Stamp. This Idaho Landscape Architect Seal stamp can make over 15,000 impressions without needing more ink. It also comes with a special dust cover that keeps it clean by avoiding dust and debris. In addition, these pre-inked stamps come with a choice of five ink colors so you can customize it to your liking. We do carry refill ink so you can add an extra bottle of ink to have on hand.
We also provide all sorts of other items that Idaho landscape architects can use. Take time to browse the site to see other ways we can make work a little easier. Our products are made to last and typically ship out in a few days for your convenience.
About ESS
At ESS, we understand that you need your seal shipped the same day or the next business day as you have deadlines to meet. We also work hard to state up to date with current board regulations as you need your seal to match the requirements. All of our seals are assembled in America. Check out our website for more designs and to view complete description details. There is never a min quantity on any of our orders. Order today and start sealing!
