Engineer Seal Stamps compliance desk. Updated 8 November 2026.
Both new and experienced landscape architects in Maryland need to have the proper tools. One of the most important items to have available is a rubber stamp or an embossing seal. Stamps and seals can be used to add your name, state, and license number to drawings, plans, and other project documents. In addition, they can be used to verify that the items were prepared by you or under your supervision.
As with other states, there are specific Maryland requirements on what these seals look like. There also may be certain information that has to be included in all document impressions. Today, we’ll be looking at all the requirements set forth by the state of Maryland for landscape architect seals. We’ll also share several products that meet the needs of the job.
Maryland Landscape Architect Seal Requirements
There are three important things to be aware of when choosing seals or stamps for Maryland landscape architect use. These include the following:
- Embossing seals and rubber stamps are appropriate for use in the state.
- The seals can range in size from 1 5/8 to 2 inches in diameter.
Maryland lets you seal with an embosser, a rubber stamp or both. There is no single mandated size; the seal can be anywhere from 1-5/8 to 2 inches across, and most licensees pick the smaller one.
These seals should state “State of Maryland” and “Landscape Architect.” In addition, each seal and stamp should have the landscape architect’s name and license number. These tools are used for signing and sealing final plans, drawings, specifications, reports, and other contract documents.
Getting in Contact With the State Board
For information about changes to seal requirements, licensing, meetings and other things related to landscape architecture in Maryland, the proper body to contact is the Maryland Division of Occupational and Professional Licensing Board of Examiners of Landscape Architects.
There are several ways to contact them, including by mail at the following address:
Maryland Division of Occupational and Professional Licensing Board of Examiners of Landscape Architects
500 North Calvert Street, Room 308
Baltimore, MD 21202
Top-Quality Stamps and Seals for Maryland Landscape Architects
Having the information you need to choose appropriate Maryland landscape architect seals, you can find items that meet your needs. We offer many landscape architect stamps and seals that can be used in the office, out in the field or both locations. All of these items meet state regulations and come with free digital seals for use on electronic documents.
Below are several options for adding impressions to documents that are set up to meet Maryland requirements. You can browse the options to get an idea of what will work best for your specific work needs.
Soft Seal Embosser
One of the top choices for State of Maryland landscape architects is the Soft Seal Embosser. It has a durable frame and precision components to create excellent impressions on documents. In addition, it offers a sliding lock mechanism for easy handling and storage and can be used in the office or on the road. This embosser has a reach of 1 ½ inch and includes a deluxe leatherette pouch for protection.
Slim Pre-Inked Stamps
For an ink stamp, we carry the Slim Pre-Inked Stamp, a compact model that travels easily from site to site. You press it to print your name and license number on official documents, and you can pick from several ink colors. It contains 50% recycled content, which makes it an eco-friendly choice, and it meets every Maryland board requirement.
Self-Inking Stamp
The State of Maryland Landscape Architect Self-Inking Stamp is another standout option for you. It’s made of synthetic materials and is filled with ink to make about 10,000 impressions. In addition, this stamp features a laser-engraved die to make clear impressions and ships out within 24 to 48 hours. These stamps have pads that are easy to fill with ink when your stamp starts to run low.
When ordering a Maryland Landscape Architect stamp, you can choose from 11 colors of ink.
Regular Hand Rubber Stamp
A more traditional option is the Maryland Landscape Architect Regular Hand Rubber Stamp, built the conventional way with a wooden handle and a broad rubber base that makes the impression. It works very well on Mylar, though you will need a separate rubber stamp pad to ink it for any document. Its die is laser-engraved, and the stamp is made in the United States.
MaxLight Pre-Inked Stamps
As a Maryland landscape architect, you may work with lots of documents. This Maryland Landscape Architect stamp is a great choice for making fast impressions. The State of Maryland Landscape Architect MaxLight Pre-Inked Stamp makes up to 25,000 stunning impressions on paperwork. It also comes in several ink colors. This Maryland Landscape Architect stamp comes with a dust cover for protection from dust and dirt.
Long Reach Seal Embosser
Add extra reach to your document impression needs with the Long Reach Seal Embosser. It’s comfortable to use and made to fit the aesthetic of the modern office. The durable construction makes it a long-lasting option for landscape architects. In addition, this Maryland Landscape Architect seal offers a 2 ½ inch reach into a sheet of paper. This embosser includes a two-year warranty on the Maryland Landscape Architect seal as a show of quality.
Handheld Seal Embosser
One of our top hybrid embossers is the Maryland Landscape Architect Handheld Seal Embosser, made for use in the office or anywhere else. It is constructed of top materials to create sharp images on documents. In addition, this seal embosser comes with a deluxe leatherette pouch to protect it when traveling or out of the office. With this quality Maryland Landscape Architect embosser, the embossing seal has a two-year warranty.
Extended Long Reach Seal Embosser
For Maryland landscape architects who need the longest reach available, the Extended Long Reach Seal Embosser extends 4 ½ inches onto the sheet. Its durable parts stand up to heavy use, and it stays comfortable in the hand.
This embosser includes a free paper guide to ensure your impressions hit the mark every time.
Desk Seal Embosser
For those who spend most of their time in the office, the Maryland Landscape Architect Desk Seal Embosser could be the perfect choice for you. It meets all state regulations while creating quick and easy impressions on contract documents. In addition, it offers a 1 ½ inch reach and includes a sliding lock for storage purposes. We also carry a line of foil stickers that work well with our embossers.
This Maryland Landscape Architect embosser is made to last and includes a two-year warranty.
Any Rubber Stamp or Embossing Seal
All of the above seals and stamps meet the various requirements set forth by the Maryland board. We also offer many other items that landscape architects in the state can use. Each of our Maryland Landscape Architect stamp products is made of top materials, ships out quickly, and comes with a set of free electronic seals for extra utility.
About ESS
Whether you need a Maryland Landscape Architect stamp or Maryland Landscape Architect seal we have the template that meets the state board requirements. All products in the professional category qualify for a complimentary set of digital seals which you can access soon after placing your order. Fill out your order today and your stamps will ship out within 24 to 48 hours. Check out our website to see more designs and view complete description details. No min quantity of products to order.
More on Maryland landscape architect seals
The Maryland rules are covered end to end in Maryland landscape architect seal requirements. See Maryland landscape architect seal and stamp guide and Maryland landscape architect license and renewal steps for the related detail.
