New Jersey Landscape Architect Feature Image: A white paper with a blue seal stamp for a licensed landscape architect in New Jersey.

For this page, no primary source confirmed a New Jersey rule on the face, size, device, signing or sealed documents for a landscape architect seal; the rule cited is N.J.A.C. 13:27, codified text not retrieved. According to the State Board of Architects, it processes landscape architect renewals and reinstatements directly. Below you will find what is confirmed, what remains open, and the New Jersey seal face we make.

Engineer Seal Stamps compliance desk. Checked against N.J.A.C. 13:27, codified text not retrieved. Sources read September 2026. Updated 8 November 2026.

Requirement What the rule says Source
Primary rule Cited for this credential, but its codified text was not read N.J.A.C. 13:27; the codified text was not retrieved
Seal contents No element list confirmed from rule text N.J.A.C. 13:27; the codified text was not retrieved
Size No size prescribed in the sources read Not addressed in the cited rules
Shape No shape stated Not addressed in the cited rules
Device type Unverified for landscape architects in particular New Jersey State Board of Architects, Frequently Asked Questions (fee schedule)
Signature Unconfirmed; no primary text was read on where or how you sign N.J.A.C. 13:27; the codified text was not retrieved
Date Unconfirmed; no primary text was read on dating N.J.A.C. 13:27; the codified text was not retrieved
Documents to seal Unconfirmed; no primary text was read on which documents need a seal N.J.A.C. 13:27; the codified text was not retrieved
Electronic seal Unconfirmed for landscape architects; the cited electronic rule is limited to engineers and land surveyors N.J.A.C. 13:40-8.1A (engineers and land surveyors only)
Renewal and reinstatement Managed directly by the State Board of Architects New Jersey State Board of Architects, Frequently Asked Questions

For the same rule in the other 53 jurisdictions, read landscape architect seal requirements by state.

What does New Jersey require on a landscape architect seal?

We could not confirm it. New Jersey landscape architects are pointed to N.J.A.C. 13:27 as the primary rule, codified text not retrieved, and for that reason this page gives no element list as law.

Everything below keeps two things apart: what a source actually says, and what we make. Where a row in the table reads unconfirmed, that is a gap in the text read for this page, not a finding that New Jersey has no rule. Our post on New Jersey landscape architect seal requirements covers the topic from another angle.

What does the New Jersey seal we manufacture look like?

Our production face for this credential has a fine-ticked serrated border, state and profession wording on the upper and lower arcs, and your license number in the center. This describes what we make, not a legal requirement.

  • An outer edge of fine radial ticks, which gives it a serrated look
  • STATE OF NEW JERSEY curving along the top
  • A second line below that wording, carrying your place name
  • LANDSCAPE ARCHITECT curving along the bottom
  • The word LICENSED under the profession wording
  • Your license number at the center, in a format such as AS00123
  • A ring of dots framing the central block

The place name line is labeled only as your place name on our artwork, and this page does not interpret it further. Compare every line against your license before you approve a proof.

What size and shape does New Jersey set?

The sources read for this page prescribe no size and state no shape for a New Jersey landscape architect seal. Our manufactured face gives the layout, but the artwork is not a published rule and carries no legal dimension.

That leaves sizing as a practical decision. Choose a size that keeps the arc wording, the place name line and the center number readable on the documents you issue.

Which device types are permitted?

For landscape architects in particular, this is not verified. On this point we consulted the New Jersey State Board of Architects, Frequently Asked Questions (fee schedule), which left the device type for this credential unresolved.

No device is ruled in or ruled out on this page. If you receive written device requirements from the Board of Architects, bring them to your order so the device matches.

How do signature and date work on New Jersey sealed documents?

This remains unconfirmed. We read no primary text on signing or dating for this page; the source cited is N.J.A.C. 13:27, codified text not retrieved.

So this page does not say whether you sign across the seal, beside it, or date it. Those points sit in rule text that was not in hand when the page was written.

Which documents must be sealed in New Jersey?

This is unconfirmed as well. No primary source was read listing which documents a New Jersey landscape architect has to seal; the citation remains N.J.A.C. 13:27, codified text not retrieved.

No document category is named here as requiring a seal, and none is named as exempt. The gap runs in both directions.

Does New Jersey's electronic seal rule cover landscape architects?

N.J.A.C. 13:40-8.1A (engineers and land surveyors only), the electronic seal rule cited here, covers only engineers and land surveyors. No primary source was found that addresses electronic sealing by landscape architects.

Borrowing the engineer and surveyor rule would stretch it past the professions it names. Until landscape architect text on electronic sealing is read, this page treats the question as open.

Who handles renewal and reinstatement?

It is the New Jersey State Board of Architects. As stated in the New Jersey State Board of Architects, Frequently Asked Questions, the Board handles landscape architect renewals and reinstatements in its own office.

That makes the Board of Architects the office to contact about your license status. Our post on New Jersey landscape architect licensing requirements covers the path to the license, and our post on the board overseeing New Jersey landscape architects describes its role.

If a license lapses, what happens to the seal?

Using the seal after a lapse is a question the sources for this page do not address. All they confirm is that this credential renews and reinstates through the State Board of Architects.

No rule is stated here either way on using the seal while a license is lapsed. If your license has lapsed, reinstatement runs through the State Board of Architects.

What should you send with a New Jersey order?

Your license number as it appears on your license, the text for the place name line, and the device you want. The arc wording and border come from our production artwork for this credential.

If the Board of Architects has given you seal specifications in writing, include them with the order so the proof can be checked against them rather than against the default artwork alone.

How do you check a New Jersey proof?

Read the proof line by line against your license: the number in the center, the place name line, and the arc wording. Confirm the number's prefix and digits match your license exactly.

Then stamp a test sheet and make sure the dotted inner ring and the serrated edge print cleanly around the text. A crowded face is harder to read on a copy.

Frequently asked questions

Is the manufactured face the same as the legal design?

Not necessarily. The face described above is our production artwork for New Jersey. It is not drawn from a published rule, and the rule text was not read for this page.

Is the word LICENSED part of a required legend?

It appears on our production artwork beneath the profession wording. Whether New Jersey's rule text calls for it was not confirmed for this page, so treat it as part of the manufactured design only.

Can I rely on the New Jersey engineer and surveyor electronic rule?

The cited electronic rule is limited to engineers and land surveyors. It does not answer the question for landscape architects.

What format does the license number take on the artwork?

The artwork shows the center number in a format such as AS00123, with letters ahead of the digits. Use the exact number printed on your own license.

Is there a separate renewal office for landscape architects?

No separate office is named in the sources read. The State Board of Architects states that it deals with both matters for landscape architects itself.

When your details are ready, choose a device from our New Jersey stamps and seals collection and send your license number with the order.

ESS Advantage

Made in USAMade in USA
6 Month Stamp Warranty6 Month Stamp Warranty
Free Electronic SealsFree Electronic Seals
FAST 1 Day TurnaroundFAST 1 Day Turnaround
State Board GuaranteeState Board Guarantee
Safe and Secure ShoppingSafe and Secure Shopping

Related products

Save 10%
Landscape Architect Hybrid Seal Embosser in black, shown with sample embossed seals for Michigan, Mississippi, and North Dakota.Yellow paper embossed with State of Alabama Registered Landscape Architect using the Landscape Architect Hybrid Seal Embosser.
Landscape Architect Hybrid Seal Embosser
9 reviews
3034LA
Sale price$44.95 Regular price$50.00
Save 14%
Landscape Architect Desk Seal Embosser with black handle and metal base, shown with sample embossed seals for Alaska and Ohio.A Landscape Architect Desk Seal Embosser imprint on a notepad, surrounded by a pen, clipboard, coffee cup, and smartphone on a desk.
Landscape Architect Desk Seal Embosser
8 reviews
3002LA
Sale price$44.95 Regular price$52.00
Save 17%
Trodat Landscape Architect handheld seal embosser with handle and embossed design, used for creating professional landscape architecture stamps.Trodat Landscape Architect handheld chrome embosser with 1-5/8 inch imprint, angled right view showing detailed design
Landscape Architect Handheld Seal Embosser
9 reviews
3001LA
Sale price$39.95 Regular price$48.00
Save 13%
Xstamper Landscape Architect Pre-Inked Rubber Stamp of Seal with teal handle and customizable seal designs for professional use.Xstamper Landscape Architect Pre-Inked Rubber Stamp of Seal in use on a white paper with a light bulb and pencils nearby.