ESS Blog
Idaho Professional Engineer Embossing Seal Stamp
All engineers practicing in Idaho are required to obtain and use an Idaho professional engineer embosser stamp or seal. It has to be 1-9/16 inches in diameter, and can be either a crimp style seal, a rubber stamp, or an electronically generated image.
How to Check Your Virginia Land Surveyor Stamp for Compliance
If you plan on trying to make it as a land surveyor, the road is going to be a bit rougher than for most. That’s because this industry is incredibly regulated, especially here in Virginia. This means you’ll have to do all kinds of extra work just to get off the ground.
Hawaii Professional Engineer Seal & Stamp Requirements
In the state of Hawaii, all professional engineers are required to use a Hawaii professional engineer embosser seal or stamp. It must be acquired at the engineer’s own expense, and must meet certain stringent requirements.
Guam Professional Engineer Stamps and Seals
All engineers conducting business in Guam are required to use Guam PE stamps or seals that conform to the standards set out by the licensing board. The official seal of the Board must consist of the Guam territory seal, surrounded by the phrase “Territorial Board of Registration for Professional Engineers, Architects, and Land Surveyors".
Georgia PE Stamp Requirements
Every engineer in the State of Georgia is required, under the regulations set out by the licensing board, to have a Georgia PE stamp or embossed seal in accordance with their certificate of registration.
How to Use Your Georgia Engineer Seal
Every Georgia professional engineer is required, under the regulations set out by the state board, to have a Georgia professional engineer stamp or embossed seal in accordance with their certificate of registration. You acquire this seal at your own expense and affix it to all documents and drawings that you submit. It must be fully compliant with the Georgia seal requirements set out by the Georgia state board for professional engineers and land surveyors.