If you are a professional engineer in the state of Washington, you need to know about the rules and regulations for the Professional Engineer stamp. In this blog post, we will discuss the different types of products that are available, as well as the rules and regulations for using them. We will also provide a link to the official website where you can find more information. Thanks for reading!
State of Washington Engineer Seal Requirements
The Washington Board requires the engineer to have a seal that should contain your name as it appears on your certificate from the state, your license number, and the words State of Washington and registered professional engineer. You may use them in any size, as long as the stamp or seal is fully legible. The design of the seal should look like the design image provided by the board.
Washington Engineer Seal State Board Info
You can email the board at engineers@brpels.wa.gov or call them at 360-664-1575 to schedule an appointment.
What Color Should the Washington PE Stamp be?
The Washington Board does not have a color requirement for the seal only that it is fully legible.
What Size is the Washington Professional Engineer Stamp?
The typical size for the State of Washington Engineer Stamp is 2" in diameter. Once again, you may have them in any size, as long as this professional seal is fully legible including the name and license number.
State of Washington Structural Engineer Seal Setup
If you are a structural engineer in the State of Washington the rubber stamp setup is slightly different from the standard Washington engineer seal.
What are the types of PE Stamps available for the Washington Engineer, or Washington Structural Engineer?
You can choose the same type of seal as you would for the regular engineer stamp but it has a slightly different set up so you would need to specify that you are a professional structural engineer.
Wood Mount Stamp
The regular wooden handle stamp is easy to use, and the separate ink pad means you can easily switch out colors if you need to. Quick-drying ink is perfect for use on mylar, and the Washington Professional Engineer Seal Stamp is guaranteed to meet your needs.
Pre Inked Stamps
This premium pre-inked stamp comes in 5 different ink colors and 6 different file types, so you can find the perfect look for your documents. Plus, it's simple to use and comes with a free electronic seal!
Self Inking Stamps
This self-inking Washington engineer seal is a simple, press-and-print stamp that comes with a free electronic seal and 6 file types including DXF, DWG, TIF, JPG format, PDF, and PNG. It's guaranteed to meet your state board specifications and is available in 11 ink colors. Plus, it's excellent for repetitive stamping with up to 5,000 impressions before needing to be re-inked. When the ink starts running low, simply reink the pad with an extra bottle of ink or replace it entirely.
Washington Engineer Seal View (Pictures Below)
Thanks for reading our blog post about the State of Washington Professional Engineer Stamp requirements! We hope this information was helpful. If you have any questions, please don't hesitate to reach out to us.
About ESS
We make seals and stamps for both business and personal use. Need stamp pads, foil stickers or ink? We have you covered, there too.
